FREE On-Site Estimates
We Come To Your Home or Business For $0 Out of Pocket
Jilly Logo 1

Plumbing issues can be a real headache for homeowners, but fret not, San Antonio residents! We’ve got you covered with the ultimate guide to simple plumbing fixes. Whether you’re a seasoned DIY enthusiast or someone who’s never picked up a wrench before, this comprehensive guide will equip you with the knowledge and skills to tackle common plumbing problems in your home.

In this guide, we’ll walk you through a variety of plumbing issues that you might encounter, from leaky faucets to clogged drains and everything in between. No longer will you have to rely solely on expensive professional plumbers to handle these pesky problems. With a few simple tools and a little bit of know-how, you’ll be amazed at what you can accomplish on your own.

Fixing a Leaky Faucet: A Simple DIY Solution

A dripping faucet can waste water, lead to higher utility bills, and cause that irritating sound that keeps you awake at night. Fortunately, fixing a leaky faucet is a relatively easy task for most San Antonio homeowners.

Step-by-Step Guide

  1. Turn off the water supply to the faucet. Locate the shutoff valve under the sink and turn it clockwise.
  2. Remove the faucet handle. Pry off the decorative cap on the handle, and then use a screwdriver to remove the screw beneath it. Gently pull the handle off.
  3. Inspect the cartridge or stem. Depending on your faucet type, you may need to remove the retainer nut or clip to access the cartridge or stem. Check for wear or damage, and replace it if necessary.
  4. Replace the rubber o-ring or washer. Worn-out o-rings or washers are often the culprits behind leaks. Remove the old one and replace it with a new, appropriately-sized ring or washer.
  5. Reassemble the faucet. Carefully put everything back together in the reverse order, and then turn the water supply back on. Test the faucet to ensure the leak has been resolved.

Unclogging Drains: Clearing the Path

Clogged drains are a common issue in San Antonio homes, leading to slow drainage and potential backups. With a few simple tools and techniques, you can usually unclog your drains without the need for chemical solutions.

Tools and Techniques

  1. Plunger: A plunger is an essential tool for unclogging sinks, tubs, and toilets. Place the plunger cup over the drain opening, push down firmly, and then quickly pull back up. Repeat this process several times to dislodge the clog.
  2. Drain Snake or Auger: For more stubborn clogs, a drain snake or auger can be used to remove or break up blockages deep within the pipe. Insert the snake into the drain, twist the handle to break up the clog, and then pull the snake back out.
  3. Drain Cleaning Tools: Simple drain cleaning tools, such as zip-it or hair grabber tools, can help remove hair and debris from sink or tub drains.
  4. Preventive Measures: Regularly clean drain stoppers and strainers, and avoid disposing of grease, food particles, and non-biodegradable materials in your drains.

Running Toilets: Silence the Constant Flow

A running toilet can waste a significant amount of water and create unnecessary noise. Addressing this issue typically involves a simple adjustment or replacement of the components within the toilet tank.

Common Fixes

  1. Check the Flapper: The flapper seals the flush valve, preventing water from flowing into the bowl. Inspect the flapper for wear or damage, and replace it if necessary.
  2. Adjust the Chain or Float: If the chain connecting the flapper to the flush handle is too long or short, it may prevent the flapper from sealing correctly. Adjust the chain length as needed. Likewise, an improperly set float could cause constant running—adjust its height to the correct water level.
  3. Inspect the Fill Valve: If the fill valve is leaking or malfunctioning, it may need to be cleaned or replaced to resolve the running issue.

Resolving Water Pressure Issues: Restoring Proper Flow

Low water pressure can make simple tasks like showering or washing dishes a frustrating experience. Addressing water pressure issues may involve cleaning or replacing components within your home’s plumbing system.

Potential Solutions

  1. Clean the Aerator: A clogged aerator on your faucet can reduce water pressure. Remove the aerator, clean out debris, and then reattach it.
  2. Inspect the Water Pressure Regulator: If your home has a water pressure regulator, check its setting and adjust it if necessary.
  3. Check for Leaks: Leaks in your plumbing system can divert water away from your fixtures and reduce pressure. Inspect your pipes and repair any leaks you find.
  4. Call a Professional: If you are unable to identify or resolve the issue, contacting a professional plumber like Jilly Plumbing can help ensure the problem is correctly diagnosed and addressed.

Simple Solutions: How to Unclog Drains for San Antonio Homeowners

Tackling simple plumbing fixes in your San Antonio home can save time, money, and prevent further damage. By following the steps and tips outlined in this guide, homeowners can address common issues with confidence. However, it’s essential to know when to call in professional help from Jilly Plumbing for more complex or high-risk repairs. 

With the right balance of DIY solutions and expert assistance, you can keep your home’s plumbing system running smoothly and efficiently for years to come. Don’t let plumbing issues put a damper on your daily life—contact our team of the best plumbers in San Antonio today for all your plumbing maintenance, repair, and replacement needs.

Skip to content